background image

[ 7 2 ]   A D D I T I O N A L   I N F O R M A T I O N

w w w . u n i d e n . c o m

Note on Power Sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace 
the battery. With normal usage, your battery should last about one year. Please contact your 
place of purchase or the Uniden Parts Department for a replacement battery. 

Warning

To avoid the risk of personal injury or property damage from fire or electrical shock, only use 
the Uniden battery model and Uniden adapter model specifically designated for this product.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with    
the telephone.

Caution

• Use only the specified Uniden battery pack (BT-446).
• Do not remove the batteries from the handset to charge them.
• Never throw the battery into a fire, disassemble them, or heat them.
• Do not remove or damage the battery casing.

Maintenance

To maintain a good charge, it is important to clean the charging contacts on both the 
handset and the base unit once a month. Using water only, dampen a cloth to clean the 
charging contacts. Then make sure to go back over the charging contacts with a dry cloth.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. 
Doing so may discolor the surface of the telephone and damage the finish.

ADDITI

ONAL 

IN

F
O
RM

A
T
I

O
N

UP323BH(DCT6485) OM ENG.book  72 ページ  2003年10月24日 金曜日 午前10時56分

Содержание DCT6485 Series

























































































Отзывы: