T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 5 9 ]
w w w . u n i d e n . c o m
Using your Answering System
The message counter displays the number of messages stored in memory. If the display
flashes, then there are new messages waiting for you. The answering system is designed to
play your new messages first. After you play all your new messages, you can then play your
old messages.
Playing your messages
1) When the phone is in standby mode, press
play/stop
.
The system announces the number of new and old messages while the message counter
displays only the number of new messages. The time and day that each message was
received is announced after the message is played. The message counter will then display
the number of current stored messages.
2) When all new messages have been played, you hear a confirmation tone and the system
announces "End of messages." The system returns to standby. After you have reviewed
your new messages, you can play your old messages by again pressing. Once you have
listened to a new message, it then becomes an old message. The old messages will be
played in the order in which they were received.
Repeating a message
1) Press
play/stop
to review your messages. The number of stored messages is announced.
2) To repeat the current message, press
repeat/SELECT
after a few seconds of beginning the
message. To quickly scroll backwards through a message, press and hold
repeat/SELECT
.
To repeat the previous message, press
repeat/SELECT
within a few seconds (about 4
seconds during remote operation) after a message begins playing. If you have several
messages, press
repeat/SELECT
repeatedly until you return to the message you want to
replay. If the current message is the first new message, the system plays back from the
beginning of the current message (it does not go back into the old message group).
3) Press
play/stop
at any time to stop reviewing messages and return to standby.
The message counter shows the number of messages stored in memory.
•Time stamp will not be
heard until you have
set the time.
•When the answering
system is full,
FL
appears on the base.
You should delete
some messages so that
the system can record
new messages.
(Refer to "Deleting a
message" on page 60.)
note
THE
INTE
GRA
T
ED
ANSWE
R
I
NG DEV
I
CE
UP01321BA̲0.book 59 ページ 2003年10月28日 火曜日 午後2時19分