20 - English
Liquid Damage
CAUTION: If the base is covered in liquid, disconnect the adapter and
phone cord from the wall before touching it.
Iftheliquidisonlyontheexteriorhousingofthebaseorhandset,wipeitoff
anduseasnormal.Ifyoucanhearliquidinsidethehousing:
1. Disconnectallcablesandcordsandremoveallcompartmentcovers.
2. Ifliquidisleakingfromanyventorhole,turnthephonesothatventfaces
down.Ifnot,placethelargestventfacedown.
3. Letdryforatleast3days.Checkforliquidinsidethephonebeforereplacing
compartmentcoversandreconnectingcords.
Resetting a Handset
Ifyouhavetroublewithahandsetorifyouwanttoreplaceone,resetit:
1. Pressandhold
FlaSh/exiT
and
pound (#)
atthesametimeuntil
System Reset
displays(about5seconds).
2. Ifyoustillhavethebasethehandsetisregisteredto,select
Deregister HS
,then
selectthehandsetyouwanttoreset.Ifyoudon'thavethatbaseanymore,
select
Base Unavailable
.
3. Toconfirm,select
Yes
.Thehandsetdisplays
Handset not registered
.
Registering a Handset
Ifyouseea“notregistered”messageonahandset,youmustregisterittoa
basebeforeusingit.
1. Placethehandsetinthebase;thedisplayshouldsay
Handset Registering
.
2. Waituntilthehandsetdisplaysays
Registration Complete
(about30seconds),
thenpickupthehandsetandpress
Talk/end
.
#
If you don’t hear a dial tone or the display says
Registration Failed
, charge
the battery completely, then try again.
Adapter and Battery Information
AC adapter
Base
Charger
Battery pack (with normal use)
Part number PS-0034
PS-0035
Part number
/ Capacity
BT-1016 / 500mAh, 2.4V DC
or
BT-1025 / 400mAh, 2.4V DC
Input
voltage
120V AC, 60 Hz
Talk time
about 10 hours
Output
voltage
7.8V AC
@ 450mA
8V AC
@ 300mA
Standby time about 7 days
Battery life
about 1 year
UseonlythesuppliedACadapters.
Usetheproperadapterforthebaseandanychargers.
Donotplacetheunitindirectsunlightorsubjectittohightemperatures.