- English
Let dry for at least 3 days.
Check for liquid inside the
phone before replacing
compartment covers &
reconnecting cords.
Resetting Handsets
If you have trouble with a handset
or if you want to replace one,
clear the registration information
from the base and the handset:
Press & hold
End
and
#
at the
same time until you see the
System Reset
menu.
If you still have the base
the handset is registered to,
select
Deregister HS
, then
select the handset you want
to reset. If you don’t have that
base anymore, select
Base
Unavailable
.
To confirm, select
Yes
. The
handset displays
Handset not
registered
.
Registering Handsets
If you see a “not registered”
message on a handset, you must
register it to a base before using
it.
Place the handset in the base;
the display should say
Handset
Registering
.
Wait until the display says
Registration Complete
(about
3.
1.
2.
3.
1.
2.
30 seconds), then pick up the
handset; press
Talk
.
If you don’t hear a dial
tone or the display says
Registration Failed
, charge the
battery completely, then
try again.
Adapter and Battery
Information
AC adapter
Part number
PS-0035
Input voltage
120V AC, 60 Hz
Output voltage 8V AC @ 300mA
Use only the supplied AC adapters.
Use the proper adapter for the base &
any chargers.
Do not place the unit in direct sunlight
or subject it to high temperatures.
Battery pack (with normal use)
Part number
BT-1022
Capacity
300mAh, 2.4V DC
Talk time
about 7 hours
Standby time
about 7 days
Battery life
about 1 year
Replace the battery when the talk or
standby time becomes noticeably re-
duced. For replacements, call the Parts
Department (see the front cover).
When the battery gets low, the handset
beeps and shows a low battery alert;
put the handset in the cradle for
recharging.
Rechargeable Battery Warning
This equipment contains a recharge-
able Nickel-Metal-Hydride (Ni-MH)
battery.
Nickel is a chemical known to the state
of California to cause cancer.
Do not short-circuit the battery.
