Uniden D1780, Руководство пользователя, Страница: 25 / 28

English - 25
may not be ensured when using this
phone.
FCC PART 15.105(b):
Note: This
equipment has been tested and found
to comply with the limits for a Class
B digital device, pursuant to part 15
of the FCC Rules. These limits are
designed to provide reasonable protec -
tion against harmful interference in a
residential installation. This equip -
ment generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particu -
lar installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures:
x
Reorient or relocate the receiving
antenna.
x
Increase the separation between the
equipment and receiver.
x
Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
x
Consult the dealer or an experienced
radio/TV technician for help.
FCC RF Exposure Information
This product complies with FCC radia -
tion exposure limits under the follow -
ing conditions:
x
The base must be placed to allow a
minimum of 20 cm (8 inches) between
the antenna and all persons during
normal operation.
x
The base must not be collocated or
operated in conjunction with any other
antenna or transmitter.
x
The handset is designed for body-worn
operation and meets FCC RF exposure
guidelines when used with any belt clip,
carrying case, or other accessory sup -
plied with this product. (All necessary
accessories are included in the package;
any additional or optional accessories
are not required for compliance with
the guidelines.) Third party accessories
(unless approved by the manufacturer)
should be avoided as these might
not comply with FCC RF exposure
guidelines.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: This equipment meets the
applicable Industry Canada Terminal
Equipment Technical Specifications.
This is confirmed by the registration
number. The abbreviation
IC
before
the registration number signifies that
registration was performed based on a
Declaration of Conformity indicat -
ing that Industry Canada technical
specifications were met. It does not
imply that Industry Canada approved
the equipment.
NOTICE: The Ringer Equivalence
Number (REN) for this terminal equip -
ment is marked on the equipment itself.
The REN assigned to each terminal
equipment provides an indication of
the maximum number of terminals
allowed to be connected to a telephone
interface. The termination on an inter -
face may consist of any combination of
devices subject only to the requirement
that the sum of the Ringer Equivalence
Numbers of all the devices does not
exceed 5.
Radio equipment
The term IC before the radio certi -
fication number only signifies that
Industry Canada technical specifica -
tions were met. Operation is subject
to the following two conditions: (1)
this device may not cause interference,
and (2) this device must accept any
interference, including interference
that may cause undesired operation of