20 - English
Screen)
or from a handset. Only one handset can screen calls at a time. If
another handset tries to screen calls, it beeps and returns to standby.
To...
From the base
From a handset
hear the caller leaving
a message
Listen to the caller
over the speaker.
Press
MEssagE/MuTE
.
answer the call
NA
Press
hoME/Flash
.
mute the call screen
without answering*
Press
Play/sToP
.
Press
END/ClEaR
or return
the handset to the cradle.
* If you mute the call screen, the system continues taking the message: it just
stops playing through the speaker.
Using the System While You're Away from Home
You can dial in to your answering system from any touch-tone phone.
Before you can use this feature, you must program a security code.
Programming a Security Code
With the phone in standby, open the menu; select
Answering Setup
, then
select
Security Code
. Use the number keypad to enter a two-digit security
code (
01
to
99
). Press
MENu/sElECT
when you’re finished.
#
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
0
and
immediately
enter your
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
3. The system announces the time, the number of messages in memory,
and a help prompt. It beeps to let you know it's waiting for a command.
4. When you hear beeping, enter a 2-digit command from the chart.
#
If you don't press any keys for 15 seconds, the system hangs up
and return to standby.
01 Repeat message
05
Stop playback
02 Play message
06
Turn the system on
03 Skip message
09
Turn the system off
04 Delete message
10
Hear help prompts
Содержание D1780-BT Series
Страница 28: ...28 English...
