Uniden D1780-10BT, Руководство пользователя

Страница: 17 / 28

English - 17
• To join a call that’s already in progress, just press
hoME/Flash
or
sPEakER
.
• To leave the conference call, hang up normally; the other handset
remains connected to the call.
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Enter the code number (up to 32 digits) into the phonebook just like
a regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press
MENu/sElECT
to send the code. If you change your mind, just close
the phonebook.
Voice Message Notification
If you subscribe to a voice mail service, your phone displays the voice mail
icon ( ) when you have a new message.
After you listen to your messages, the message icon turns off. If it doesn’t,
you can reset it: With the phone in standby, open the menu and select
Global Setup ; select VMWI Reset , then select Yes.
If you change voice mail providers, you can edit your voice mail number.
Open the menu and select Global Setup/Edit Voice Mail .
USING THE ANSWERING SYSTEM
Answering System Options (
Answering Setup
)
You can set or change the answering system options from any handset. Just
open the menu and select
Answering Setup
. Select one of the following:
Security Code
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 20).
Ring Time
Set the number of rings ( 2 , 4 , or 6 ) before the system
answers. Toll Saver makes the system answer after 2 rings
if you have new messages or after 4 rings if you don't.