English - 16
phone cord and modular plug is provided
with this product. It is designed to be
connected to a compatible modular jack
that is also compliant. See installation
instructions for details.
The REN is used to determine the
number of devices that may be con-
nected to a phone line. Excessive RENs
on a phone line may result in devices
not ringing in response to an incoming
call. In most but not all areas, the sum
of RENs should not exceed five (5.0). To
be certain of the number of devices that
may be connected to a line, as determined
by the total RENs, contact the telephone
provider. The REN for this product is
part of the product identifier that has the
format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the tele-
phone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be
required. But if advance notice isn't prac-
tical, the telephone company will notify
the customer as soon as possible. Also,
you will be advised of your right to file a
complaint with the FCC if you believe it
is necessary. The telephone company may
make changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications to
maintain uninterrupted service.
Please follow instructions for repairing,
if any (e.g. battery replacement section);
otherwise do not substitute or repair any
parts of the device except as specified in
this manual. Connection to party line
service is subject to state tariffs. Contact
the state public utility commission, public
service commission or corporation com-
mission for information. This equipment
is hearing aid compatible.
If you experience trouble with this equip-
ment, contact the manufacturer (see the
cover of this manual for contact informa-
tion) or an authorized agent. If the equip-
ment is causing harm to the telephone
network, the telephone company may
request that you disconnect the equip-
ment until the problem is resolved.
If your home has wired alarm equipment
connected to a phone line, be sure that
installing the system does not disable your
alarm equipment. If you have questions
about what will disable alarm equipment,
contact your telephone company or a
qualified installer.
Any changes or modifications to this
product not expressly approved by the
manufacturer or other party responsible
for compliance could void your authority
to operate this product.
NOTICE: According to telephone com-
pany reports, AC electrical surges, typi-
cally resulting from lightning strikes, are
very destructive to telephone equipment
connected to AC power sources. To mini-
mize damage from these types of surges,
a surge arrestor is recommended.
FCC Part 15 Information
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) This device must accept any interfer-
ence received, including interference that
may cause undesired operation. Privacy
of communications may not be ensured
when using this phone.
FCC PART 15.105(b):
Note: This
equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
