Uniden CLX 465 SERIES, Руководство пользователя

Страница: 50 / 80

Us
i
n
g Y
o
u
r
P
h
o
n
e
[ 4 9 ] U s i n g Y o u r P h o n e
w w w . u n i d e n . c o m
If you have an access number already entered, the current number will appear in
the display. To delete that number, press the
DELETE soft key. If you need to have
the phone wait before sending the next digits, press the PAUSE soft key. Press the
center of the joystick or menu/select on the base when you finish.
A
P
appears in the display each time you press the PAUSE soft key; each pause inserts
a two-second delay in the dialing sequence, and each pause counts as one digit.
Voice Mail Tone
Your telephone service provider should provide you with the specifics of your voice
mail service upon your enrollment. If you are having trouble with your message
waiting indicator on your phone not illuminating when you have waiting messages,
you will need to contact your service provider and inquire as to which type of
message signal (SDT or FSK) their service is using.
If your voice mail service uses a SDT message signal to alert you of a new voice mail
message, you will need to turn on the Voice Mail Tone.
If your voice mail service uses a FSK message signal to alert you
of new voice mail messages, you can turn the Voice Mail Tone off.
To turn off Voice Mail Tone, go to
V oi ce Ma i l T on e
and select
O ff
.
Resetting the New Message LED for Base
If the LED remains on after you've retrieved your messages, you may need to reset
the indicators. To reset the New Message LED, go to
V MW I R e se t
and press the
SELECT soft key or menu/select , you will hear a confirmation tone.
8QKEG/CKN6QPG
1P
1HH
5'.'%6
System Setup
Global
Voice Mail
Tone
VMWI
Reset