38
Special Features
•
Close Call works better with some types of
transmissions than others. It might not correctly
display frequency information for transmitters
using a highly directive antenna (such as an
amateur radio beam antenna), if there are many
transmitters operating at the same time in the
same area, or if the transmitter is a broadcast
television station.
Setting the Close Call Options
1. Press
Func
then press and hold
C
for
2 seconds. One of the following Close Call
options appears.
C-C.bnd
: Lets you select the Close Call band.
C-C.ALt
: Lets you select the Close Call alert
settings.
C-C.PS
: Lets you turn Pager Screen on or off.
Pager Screen lets you set the scanner so it does
not detect pager frequencies.
C-C.dnd
: This prevents breakings in audio dur-
ing Close Call checks.
2. Repeatedly press or to select the option
you want, then press
E
.
If you selected
C-C.bnd
, one of the following
band names appears.
bnd Lo
: VHF Low Band (25.0000 - 54.0000 MHz)
bnd Air
: AIR Low Band (108.0000 - 136.9875
MHz)
bnd Hi
: VHF High Band (137.0000 - 174.0000
MHz)
bnd UHF
: UHF Band (406.0000 - 512.0000 MHz)
