14
Locking a Channel While Scanning
If the scanner keeps stopping on a particular channel due to
noise or too frequent transmissions, you may want to prevent
the channel from being in the scanning sequence.
1. Wait until the scanner stops at
the channel.
2. Then press
.
3. The scanner immediately
resumes scanning because the
locked out channel is no longer
in the scanning sequence.
Lockout Tips
•
To quickly lockout a series of channels, start with the lowest
number channel.
For example, if you are locking out channels 4, 7, 8, 12,
and 15, start with Channel 4. After selecting channel 4,
press
. Then press
one or more times to step
up to the next channel to be locked out.
•
Record the locked-out channels in some convenient place so
you can restore them.
BC45XLT 11/2/00 9:04 Page 14
