Uniden Atlantis 150, Руководство пользователя

Страница: 23 / 40

E-23
Uniden Atlantis 150 Owner’s Manual
Problem Things to Try
The power LED on the
charger doesn’t turn on.
• Don’t use the charger when the ambient
temperature is below 32°F (0°C) or above
113°F (45°C).
• Make sure the charging contacts on the
radio and charger are clean.
• Replace the battery.
The radio won’t transmit.
• Make sure you are not in Scan mode.
• Make sure you are not trying to transmit
on a receive-only channel (see the
channel lists starting on page E-25).
• Check the battery power level; if it’s
low, charge the battery before trying to
transmit.
• Make sure the duration of each
transmission is less than 3 minutes.
I can’t hear anything from
the speaker.
Adjust the squelch level; it is probably too
high.
Noise comes out of the
speaker all the time
Adjust the squelch level; it is probably too
low.
I can transmit, but no one
can hear me.
Check your UIC channel settings: does
the area you are in use different channel
assignments?
Where can I find my
radio’s serial number?
The serial number is on a plate inside the
battery compartment.
SPECIFICATIONS
General
Channels
All US, International, and Canada marine
channels
Frequency Control PLL
Frequency Tolerance Transmit: 0.5 PPM (at 25°C)
Operating Temperature -4°F (-20°C) to +122°F (+50°C)
Antenna Flexible Whip
Microphone Built-in Electret type
Display Liquid Crystal Display