55
Troubleshooting
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
When.you.want.to.change.the.digital.security.code.
You.lose.a.handset.and.purchase.a.new.one.
You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
You.are.unable.to.register.any.handsets.to.the.base.
When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as.“Handset.#4”.but.you.only.have.two.handsets.)
When.you.are.instructed.to.by.one.of.Uniden’s.call.center.representatives.
Press.and.hold.
[
]
.and.
[#]
.for.more.than.5.seconds..Select.DEREGISTER.HS.
Select.the.handset.which.you.are.operating,.then.press.
[select/
]
.
The phone will ask you to confirm the deregistration. Select YES. The selected handset will clear its registration
information.from.the.base,.and.then.delete.the.link.to.the.base.from.its.own.memory.
When.the.base.information.is.deleted,.the.handset.displays.HANDSET.NOT.REGISTERED-PLACE.HANDSET.
ON.BASE.TO.REGISTER..SEE.YOUR.OWNER'S.MANUAL.FOR.HELP.
Re-register.the.handset.to.the.base.(see.Registering.Accessory.Handsets.on.page.22)..
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power.
•
•
•
•
•
•
)
2)
3)
4)
5)