manualshive.com logo in svg

Uniden 9322402011134, Руководство пользователя

Поделиться
Скачать
Uniden 9322402011134 Скачать руководство пользователя страница 13

Connecting the Microphone

Front MIC Jack

Push the MIC plug at the end of the microphone into the MIC jack until the connection 
locks into place. Gently tug the MIC cord to test that the connection is locked. Use the 

Front MIC Jack cover which is threaded onto the MIC cord to seal the MIC jack entry 

from dust.

 

Disconnecting the MIC from the Front MIC Jack

Pull away the threaded rubber collar and move it down along the cord. Using the flat 

blade of a screwdriver or similar object carefully press the lock tab at the bottom of the 
MIC plug and push it upwards. At the same time tug on the MIC cord to draw back the 

MIC plug.

 

Rear MIC Jack

Use the Rear MIC Jack if the main base is mounted where a front MIC connection is 

intrusive or if you wish to use the Remote LCD Speaker MIC with an optional extension 
cable.

Peel the dust cover from the rear MIC jack. Push the MIC plug at the end of the 
microphone into the MIC jack until the connection locks into place. An optional 2m 
extension cable kit is available to enable mounting the main base in a hidden location.

13

UNIDEN UH8055S

UHF CB Transceiver

NOTE

 
The unit will not function if connected to two Remote LCD Microphones 
(optional RM880) at the same time.

Содержание 9322402011134

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды