12
INSTALLING AND ADJUSTING YOUR PHONE
Place the power cord
so that it does not
create a trip hazard
or where it could
become chafed and
create a fire or
electrical hazard.
▼
Wall Installation
You can mount your phone directly to the wall. Before doing this,
consider the following:
• Select a location away from electrical cables, pipes, or other
items behind the mounting location. Inserting screws into areas
such as this can be hazardous.
• Try to mount your phone within 10 - 15 feet of a working
phone jack in order to avoid excessive cord lengths. Remember,
you are not mounting to a wall plate with a built in phone jack.
• If the selected mounting area has no wooden support beams
directly behind it, you will need the appropriate anchoring
devices in order for the wall to properly support your phone.
2) Attach the wall mount bracket into place on the bottom of the
phone.
3) Plug the AC adaptor into the base.
4) Plug the AC adaptor into a standard 230-240 VAC wall outlet.
5) Plug one end of the telephone cord into the TEL LINE jack on
the back of the base, then plug the other end into a standard
telephone jack.
6) Line up the mounting slots on the wall mount bracket with the
mounting screws on the wall, then push in and down until the
phone is firmly seated.
1) Insert two mounting screws into the wall, with their appropriate
anchoring device if necessary, 83mm apart. Allow about 5mm
between the wall and screwheads for mounting the phone.
Before using your
phone, fully charge
the Nickel-Cadmium
battery pack
for 12-15 hours.
HINT
CAUTION
5mm
83mm
DG 910 operating guide 2/3/99 12:55 PM Page 12
