9
Day & Time
Menu
Use this menu to set the clock manually. (If you have Caller ID, the
phone sets the day and time from the CID data.) Select the day of week,
then use the number keypad to enter the hour and minutes in HHMM
format (e.g., enter 0345 for 3:45). Then, select AM or PM.
Global Setup
Menu
The settings on this menu affect all handsets. Only one handset at a
time can change these menu options.
Insert 0
Adds “0” or “00” to the beginning of the number
received from Caller ID. The default setting is ON for
New Zealand and OFF for Australia.
VMWI Reset
Reset your Visual Message Waiting Indicator to
bring it back in sync with your voice mail service.
Entering Text on Your Phone
Use the 12-key dial pad when you want to enter text into your phone
(a name in the phonebook, the handset banner, etc.).
The phone defaults to a capital letter for the first letter and any
letter after a space; otherwise, it uses small letters.
To switch to all capital letters, press
*
.
The phone defaults to all
capital letters first (e. g. ABCabc2) until you enter a blank space or
press
*
again. (Any time you want to change case, just press
*
.)
If two letters in a row use the same number key, enter the first
letter and wait a few seconds (or press
RigHT
); the cursor will
move to the next space. Enter the next letter.
Press
#
to enter a blank space.
To change a letter, move the cursor to that letter and press
ClEaR
to erase the letter. Then, enter the new one.
To erase the entire entry, press and hold
ClEaR
.
Press
0
to cycle through all available symbols and punctuation.
