24
Diagnose WLAN
L
→
◄
(
)
→ 9. Admin Menu → Enter Password → 3. Diagnostic → 2.Diagnose WLAN
While diagnose WLAN, cannot receive the call while scan WLAN network.
Results of the Diagnose WLAN
The diagnosis of wireless communication surroundings is possible to find out the connection
from WPU-7800G to AP, the units of AP around and inside of the present-connected channel,
and variables of the surroundings through diagnosing the status of wireless local area
Each output information is automatically updated once per one minute, AP status around can
be updated pressing on the soft key (searching). Automatic update of AP around net-time is
not recommended, but need to press on the button when needed, because frequent updating
by scanning could give bad influence, when engaged
Each information unit is, except for dBm, is (RSSI/SNR/NF) hexadecimal of them.
RSSI: Received Signal Strength Indication (dBm)
SNR: Signal to Noise Ratio (dBm)
NF: Noise Floor (dBm)
RP: Rx Packet Count/Rx Bytes
TP: Tx Packet Count/Tx Bytes
RE: Rx Error Count/Rx Dropped Count/Rx Length Error Count TE: Tx Error Count/Tx Dropped
Count
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
