background image

Specification

41

FCC ID: SQMSQ-3500

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation. Any changes or modifications (including the antennas) made to this device

that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This device and its antenna must not be co-located or operating in conjunction with any

other antenna or transmitter. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

---Reorient or relocate the receiving antenna.

---Increase the separation between the equipment and receiver.

---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

---Consult the dealer or an experienced radio/TV technician for help.

Frequency band of 5.15GHz to 5.25GHz is restricted to indoor used only to reduce any potential for harmful interference.

Open Source Software Information

For instructions on how to obtain a copy of any source code being made publicly available by UniData related to software used in this UniData Wi-Fi 
phone, you may send your request in writing to the address below. Please make sure that the request includes the model number and the software 
version number.
UniData Communication Systems, Inc.
3F,BuRim-Bldg, 837-6, BangBae-Dong, SeoCho-Gu, Seoul, 137-835, Korea
The UniData website 

www.udcsystems.com/opensource

also contains information regarding UniData's use of open source.

Содержание SQ-3500


















































Отзывы: