FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH
Page 17
Version 1.3 / December 2018
5.8 Products loading
After the completion of installation and vending machine adjustment load the vending machine with
products:
-open the vending machine door, so it does not interfere with shelves moving-out;
-pull the shelf latch, located on the left, following which pull out the shelf up to the stop by firmly hold-
ing the shelf by its lower part. To facilitate loading the upper shelves are inclined when pulled out (fig. 9);
figure 9 - Shelves loading
-start loading from the front, don’t leave hollow spaces. Insert the products from above between the
spiral turns. The label with product name should be turned towards the showcase, so it’s well seen by the
customer. The products shouldn’t be squeezed between the spiral turns;
-after the loading fit the shelves back into the vending machine up to the fixed position;
-put the price tags into the groove for price tags (fig.10).
figure 10 - Price tags installation
ATTENTIoN!
To prevent the vending machine overturning pull out one shelf at a time, goods should
be laid in such a way, that the space for falling into the product dispensing tray is free
from protruding parts of other products or shelves! The shelves should be pushed all
the way back!
