46
Version 1.0 / 11-2018
The vending machine controller permits conducting the vending machine
setting, software updating and collecting the statistics by means of file inter-
change via the USB-flash drive.
The drive is connected to the USB connector, located on the controller board
(fig. 8.1). The connection should be carried out in the sales mode. When con-
necting the drive the touch screen will display the relevant messages about
the drive operation.
ATTENTION! The vending machine accepts USB-flash drives only!
Disk drive and flash-disks are not supported. Only USB-flash drives with
FAT16 or FAT32 file systems are supported. Other file systems (includ-
ing NTFS) are not supported.
Information that may be read from the USb-flash drive from the vend-
ing machine:
1.
Statistics (Audit):
The information about the vending machine operation,
sales, equipment operation, events. is saved to files in the EVA-DTS format,
file name: Axxmmddi.DTS
- хх = the 2 last digits of the vending machine serial number
- mm = month (if date and time are set in the vending machine menu)
- dd = date (if date and time are set in the vending machine menu)
- i = a number in the range from 0 to 9. You can save up to 10 files with dif-
ferent names within 24 hours.
To read the information insert the USB-flash drive into the controller board
connector while in sales mode and confirm the
Save audit?
request.
2.
Current configuration:
File in the EVA-DTS format. Filename: сххххххх.
DTS, then the 7-digit vending machine number, (e.g.: с0000123.DTS).
The file contains the information about the equipment configuration, as well
as the information about the products placement, names, and prices.
To read the information insert the USB-flash drive into the controller board
connector while in sales mode and confirm the
Record configuration?
re-
quest.
Information that may be loaded from the USb-flash drive into the vend-
ing machine:
1.
Configuration for the specific vending machine
: File in the EVA-DTS
