Introduction
RFW-Series | Version 1.01
3
1 Introduction
You have made a good choice by purchasing a
UNICRAFT roller driver.
Carefully read the operating instructions prior to commission-
ing.
They describe correct commissioning, intended use
and safe as well as efficient operation and maintenance
of your roller driver.
The operating instructions form part of the roller driver.
Keep these operating instructions at the installation lo-
cation of your roller driver. Also observe the local acci-
dent prevention regulations and general safety regula-
tions for the use of the roller driver.
1.1 Copyright
The contents of these operating instructions are pro-
tected by copyright. Their application is permitted within
the context of the use of the roller driver. Any further use
shall not be permitted without written consent by the
manufacturer. For the protection of our products, we
shall register trademark, patent and design rights, as
this is possible in individual cases. We strongly oppose
any infringement of our intellectual property.
1.2 Customer service
Please contact your specialist retailer if you have any
questions regarding your roller driver or require any
technical information. Your specialist retailer will be
happy to support you with specialist advice and infor-
mation.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Germany
Repair service:
Fax:
0049 (0) 951 96555-111
Email: [email protected]
Spare parts orders:
Fax:
0049 (0) 951 96555-119
Email: [email protected]
We are always interested in valuable experience and
knowledge gained from using the application, which-
then could be shared and be valuable to develop our-
products even further.
1.3 Disclaimer
All data in these operating instructions has been com-
piled on the basis of the state-of-the-art, valid standards
and guidelines as well as our many years of expertise
and experience.
The manufacturer shall not be liable for damage in the
following cases:
- Non-observance of these operating instructions
- Unintended use
- Deployment of untrained staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the de-
scriptions and illustrations in this document as a result of
special variants, optional extras or recent, technical
modifications.
The obligations defined in the supply contract shall ap-
ply in addition to the general terms and conditions and
the manufacturer's general terms and conditions as well
as the statutory regulations valid at the time of the con-
clusion of the contract.
2 Safety
This section provides an overview of all important safety
packages for personal protection as well as safe and re-
liable operation. The sections on individual service life
phases contain additional, specifically applicable safety
information.
2.1 Legend of symbols
Safety Instructions
Safety instructions in these operating instructions have
been highlighted with symbols. Safety instructions are
indicated by signal terms that express the degree of risk
involved.
DANGER!
This combination of symbol and signal term indi-
cates a directly dangerous situation which may
cause death or serious injury if not averted.
