ENDAT
‐
N3410
User’s
Manual
UNICORN
COMPUTER
CORP.
Copyright 2015 Unicorn Computer Corporation. All rights reserved.
31
3.2.
Jumper Setting
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is
“close”, if not, that means the jumper is “open”.
Jumper List
JCMOS
CMOS Data Clear
JRTC
RTC Timer Clear
JP1 LCD
Power
JP2
LVDS Inverter power
JP3
SATA#1, Power select for SATA-DOM module
JP4
SATA#2, Power select for SATA-DOM module
JP5 N/A
JP6
for and power select via pin#9 of JCOM1,2
JP7
for and power select via pin#9 of JCOM1,2
JP8
LVDS back-light select
JCMOS1:
Clear
CMOS
Jumper
The jumper allows users to restore the BIOS safe setting and the CMOS data.
Please carefully follow the procedures to avoid damaging the motherboard.
Item
Normal Operation
Clear CMOS data
Pin Close
1-2 (Default)
2-3
※
Clear
CMOS
Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 1-2 close”, you can use a metal object like a screwdriver to touch the two pins.
3. Wait for five seconds.
4. After clearing the CMOS values, be sure the jumper is “Pin 1-2 open”.
5. Plug-in DC power input.
6. Power on the system, then hold function key”F2” enter to BIOS SETUP by keyboard Press
7. Load Optimal Defaults and save settings in CMOS.
