Unicorn 17-HD Скачать руководство пользователя страница 28

Страница: 28 / 30

Unicorn series User Manual

3.4.2 Connecting the Console

To connect an LCD console to a computer, perform the following steps

Figure 3-1. The Rear View of LCD Console

1. Turn off your computer. You should always turn off your computer before

connecting or disconnecting a device.

2. Connect the video (VGA) connector of the KVM cable to the video card connector

on the rear panel of your computer.

3. Identify and connect the PS/2 mouse and PS/2 keyboard connector to the correct

PS/2 ports on the rear panel of your computer. Or you can use USB interface to

connect your computer. ( Use PS/2-USB switch to select your interface. The

switch has to be on PS/2 side when you use PS/2 interface connector.)

4. Connect the AC to DC power adapter to the power inlet on the console and then to

a power outlet.

With USB Hub

：

Figure 3-2. The rear view of console (USB Hub)

1. Turn off your computer. You should always turn off your computer before

connecting or disconnecting a device.

2. Connect the video (VGA / DVI / HDMI) connector of the KVM cable (DVI / HDMI)

to the video card connector on the rear panel of your computer.

3. Identify and connect the PS/2 mouse and PS/2 keyboard connector to the correct

PS/2-USB switch

USB Hub port

HDMI port

DVI port

Содержание 17-HD































Результаты поиска

Содержание 17-HD

Отзывы:

Похожие инструкции для 17-HD

Бренды по названию

Популярные бренды

Unicorn 17-HD, Руководство пользователя

Результаты поиска

Содержание 17-HD

Отзывы:

Похожие инструкции для 17-HD

Бренды по названию

Популярные бренды