6
UC-TS003 USER’S MANUAL
UNICORN-COMPUTER
Adjustment of VGA mode and position of television:
The
position of television will change
when VGA
mode changed
(for example: from
640X480 with 16 bits color to 640X480 with 24 bits color.). UC-TS003 provides the
feature to
adjust and save
position of television by
on-board
switches.
The green LED will be “turn-on” when any switch was pressed. The adjusted function
is accepted when the switch is released and green LED is turn-off.
The
red
LED is always on until the
input power failure
.
Operation guide (make sure first the all H/W configuration was correct):
Step1
: Boot system and set the VGA mode (resolution and color depth) as you want.
Step2
: Adjust the position of television by these keys:
MOVE UP/ DOWN/ LEFT/ RIGHT
.
Step3
: Press the
SAVE
key to save setting and the green LED will flash 3 times.
Step4
: Shutdown the system and turn-on again to verify the position of television.
Create by RobertLiou, 2002/09/19. Rev: 1.0
