User’s Manual
21
3-1. Standard CMOS Features
The Standard Setup is used for the basic hardware system configuration. The main
function is for Data/Time and Hard Disk Drive settings.
Item
Available Options:
Date (mm:dd:yy)
Time (hh:mm:ss)
＞
IDE Channel 0 Master:
Auto
＞
IDE Channel 0 Slave :
Auto
＞
IDE Channel 1 Master:
Auto
＞
IDE Channel 1 Slave :
Auto
Video
EGA/VGA
Halt On
All , But Keyboar
˙
IDE HDD Auto-Detection
Press <Enter> to auto-detect the parameters of the IDE/SATA device on this
channel. IDE Channel 0, 1, 2, 3 Master/Slave configure your IDE/SATA devices
by using one of the three methods below:
˙
IDE Channel Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
Auto: Lets BIOS automatically detect IDE/SATA devices during the POST.
(Default)
None: If no IDE/SATA devices are used, set this item to None so the system will
skip the detection of the device during the POST for faster system
startup.
Manual: Allows you to manually enter the specifications of the hard drive when
the hard drive access mode is set to CHS.
˙
Access Mode
Set the hard drive access mode. Options are: Auto (default), CHS, LBA,
and Large.
˙
Video
Select the type of primary video subsystem.
<Choice: EGA / VGA, CGA 40, CGA 80, MONO>
