18
Selecting and recording the log
Sending commands to the Receiver
Operating and configuration the ASCII view
The trajectory view for displaying the present point and the past point of the
Receiver
Switching Views over the tracking window
Switching between Constellation Views
Resetting the Receiver
Replaying the GGA log
Figure 4-5 UPrecise Software
4.4.1
Operation Procedures
Step 1. Follow 4.2 Installation Guide to connect the power source, antenna to the board,
and turn on the EVK switch
Step 2. Click file - > connect the serial port, and set the baud rate; the default baud rate
of UB4B0M is 115200bps
Figure 4-6 Connect the Serial Port
