unicore UM220-IV NL Скачать руководство пользователя страница 2

 

 

 

Revision History  

Version  

Revision  

Date  

Ver. 1.0.0 Primary  UM220-IV NL User manual Primary. 

Dec.2017  

Ver. 1.0.1 Alpha 
release  

The Pin definition and performance parameters have 
been updated. 

Jun.2018 

Ver. 1.0.2 Beta 
release 

Updated size parameters 

Aug.2018 

Ver. 1.0.3 Product 
release 

Update product label instruction 

May.2019 

R1.1 

1.2: Delete the GLONASS frequency 

6.2: Add shelf life 

Sep. 2019 

R1.2 

Chapter 6.2: revise the MSL instructions 

Jan. 2020 

R1.3 

Add the footnote to elaborate CEP 

Oct. 2020 

R1.4 

Add the description of SMT stencil 

Jun. 2021 

R1.5 

Update power supply VCC and V_BCKP 

Aug. 2021 

R1.6 

Add notes in Section 4.4 

Nov. 2021 

R1.7 

If hot start is not used, connect V_BCKP to VCC. 

Revise the VSWR in section 1.2 

Nov. 2022 

R1.8 

Optimize the description of antenna power supply; 

Add Chapter 4.3 Power Supply Requirements 

Apr. 2023 

R1.9 

Modify the description of “order code” to “sub-model” 

Jan. 2024 

Legal right notice  

This manual provides information and details on the products of Unicore 

Communication, Inc. (“Unicore”) referred to herein.  

All rights, title and interest to this document and the information such as data, designs, 

layouts contained in this manual are fully reserved, including but not limited to the 

copyrights, patents, trademarks and other proprietary rights as relevant governing laws 

may grant, and such rights may evolve and be approved, registered or granted from the 

whole information aforesaid or any part(s) of it or any combination of those parts. 

Содержание UM220-IV NL
























Отзывы: