Unicont SPb PS-303 Скачать руководство пользователя страница 11

Unicont SPb Ltd 

 

Technical Documentation PS-303 

 Page 

11 

6.

 

Transportation and Storage 

The battery charger shall be stored in heated space at air temperature of +5 º

С

 to +35 º

С

 

(maximum values of -60 º

С

 to +70 º

С

), at relative humidity of air not exceeding 95 % at 

temperature of +25 °C and content of dust, oil, moisture and aggressive admixtures in the air not 
exceeding the norms envisaged by GOST 12.1.005-88 for the working zone of production areas. 

The device shall be transported in transport container of the manufacturer in closed 

transport. 

Means of transport: 

 

automobile and railway closed transport (covered wagons, universal containers) 

 

by air (in pressurized and heated bays of airplane) 

 

by sea (in dry service spaces). 

The device shall be transported in accordance with the transport regulations in force for 

the particular transport. 

During handling operations and transportations strictly observe the requirements of 

handling marks on boxes and do not allow bumps and impacts which can affect preservation and 
serviceability of the device. 

Packed devices shall be reliably secured in vehicles. 

After storage in stores or transportation at temperature below +10 º

С

 the devices shall 

be unpacked only in heated spaces after keeping them unpacked in under normal climatic 
conditions for12 hours. 

 

 

Содержание PS-303














Отзывы: