18
GETTING TO KNOW YOUR E
cho-40F
©E
cho-40F
User Manual
Pin No.
10/ 100Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/ off
when Ethernet data packets are being transmitted/ received.
1
8
LED
10Mbps
100Mbps
1000Mbps
Right
Bottom Led
Off
Solid
Green
Solid
Orange
Left
Bottom Led
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
2.2.9 10/ 100/ 1000 Mbps Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side of E
cho-40F
. LAN 1 is powered by Intel
®
218LM
Ethernet engine; LAN 2 is powered by Intel I210 Ethernet engine. When both
LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled.
Using suitable RJ-45 cable, you can connect E
cho-40F
system to a computer,
or to any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pinouts of LAN 1 and LAN 2 are listed as follows:
USB 2.0
USB 3.0
POWER
RESET
HDD
PWR
DP1
DP2
LAN1
LAN2
DVI-D
CFast
SIM 1
SIM 2