Unicomp Labs Echo-236F-G4, Руководство пользователя

Страница: 47 / 127

40 GETTING TO KNOW YOUR E cho-236F
©E cho-236F User Manual
2.3.5 PoE (Power over Ethernet) Ports
There are 4 RJ45 connectors in the rear side of E
cho-236F
. It supports IEEE
802.3at (PoE
+
) Power over Ethernet (PoE) connection delivering up to 37W/
54V per port and 1000BASE-T GigE data signals over standard Ethernet Cat
5/ Cat 6 cable. Each PoE connection is powered by Intel
®
I210 GigE Ethernet
controller and independent PCI express interface to connect with multi-core
processor for network and data transmit optimization. Only when PoE port starts
to supply power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 1 and LAN 2 are listed as follows:
COM 1
COM 2
COM 3
COM 4
DC-IN
Isolated
DIO
20 11
10 1
D I PIN 1 ~ 8 DO PIN 11 ~ 18
Power Switch
On / Off IGN
LAN 4
LAN 3
LAN 6
LAN 5
3 4
PoE+
5 6
PoE+
Pin No. 10/ 100 Mbps 1000 Mbps PoE
1 E_TX+ MDI0_P PoE+
2 E_TX- MDI0_N PoE+
3 E_RX+ MDI1_P PoE-
4 ---- MDI2_P ----
5 ----- MDI2_N ----
6 E_RX- MDI1_N PoE-
7 ----- MDI3_P ----
8 ------ MDI3_N ----
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000 Mbps Ethernet network; The left LED will keep twinkling/
off when Ethernet data packets are being transmitted/ received.
1 8
LED Status 10Mbps 100Mbps 1000Mbps
Right
Bottom Led
Off
Solid
Green
Solid
Orange
Left
Bottom Led
Flash
Yellow
Flash
Yellow
Flash
Yellow