4. Console Management
Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and
run a terminal emulation program
or
Hyper Terminal
and configure its
communication parameters
to match the following default characteristics of
the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
Figure 4-1. The settings of communication parameters
After finishing the parameter settings, click “
OK
“. When the blank screen
shows up, press Enter key to bring out the console management main screen.
Then, press any key to enter the function management screen.
