UNICOM CB-320, Инструкция по эксплуатации

Страница: 11 / 17

CB-320 INSTRUCTION MANUAL PAGE 19 PAGE 18 CB-320 INSTRUCTION MANUAL
1. Press the MENU key to enter the menu option.
2. Press UP/DOWN repeatedly until ‘POWER’ is displayed (Option #03).
3. Press
MENU
to enter the selected option and
UP/DOWN
to change the setting.
4. Press
MENU
to confirm the change and store your selection.
5. Press
EXIT
to go back to standby.
VOX SETTINGS
The VOX feature allows you to have hands-free conversations. When you speak, the mi-
crophone automatically detects your voice (or other nearby sound) causing the radio to
transmit without the need to press the PTT.
To enable VOX operation
1. Press the
MENU
key to enter the menu option.
2. Press UP/DOWN repeatedly until ‘VOX.SWI’ is displayed (Option #04).
3. Press MENU to enter the selected option and UP/DOWN to select ‘ON’ or ‘OFF’.
4. Press MENU to confirm the change and store your selection.
5. Press EXIT to go back to standby.
When VOX is enabled, the icon VOX is visible on the display.
NOTE: Using the radio in a noisy environment with the VOX set to ON could cause the
radio to transmit unexpectedly. If this happens simply turn the VOX OFF.
POWER ON MESSAGE
You have the options to select what to display when power on. A welcome message,
Voltage or keep it blank.
To change the power on message
1. Press the MENU key to enter the menu option.
2. Press UP/DOWN repeatedly until ‘POW.MSG’ is displayed (Option #05).
3. Press MENU to enter the selected option and UP/DOWN to change the setting.
4. Press MENU to confirm the change and store your selection.
RECEIVER (TRANSMITTER) CTCSS/DCS CODES
The radio is fitted with both CTCSS and DCS systems. There are 50 CTCSS tones and 208
DCS codes. The DCS codes and the CTCSS tones are accessed through the same menu
(see table below). When CTCSS tones are being selected ‘CT’ is displayed. To access DCS
codes press EXIT to skip the CTCSS tone until ‘DCS’ is displayed.
NOTE:
The other parties need to have the same CTCSS/DCS code as yours in order for
you to receive their transmission.
To select a CTCSS or DCS code for receiver
(same procedure as for transmitter)
1. Press the
MENU
key to enter the menu option.
2. Press
UP/DOWN
repeatedly until ‘R-CTDC’ (receiver code, option #06) or ‘T-CTDC’
(transmitter code, option #07) is displayed.
3. Press MENU to enter the selected option then press EXIT to select from OFF, CTCSS
(‘CT’ is displayed) or DCS (‘DCS’ is displayed) codes.
4. Press UP/DOWN to change the codes.
5. Press MENU to confirm the change and store your selection.
6. Press EXIT to go back to standby.
KEYPAD LOCK
The Keypad Lock disables the keys to prevent accidental key presses from changing the
preferred settings of the radio. When the keys are locked, the icon “ “ is displayed and
the 4 front keys will be locked. The
PTT and the 2 side keys remain unlocked.
To manually lock the Keypad press and hold the EXIT key. The icon “ “ will appear on
the display.
To unlock the keypad, press and hold the
EXIT key. The icon “ “ will disappear.
Or follow the steps below to set a time interval for the radio to lock the keypad automat-
ically.
To Set the Auto Keypad Lock
1. Press the MENU key to enter the menu option.
2. Press UP/DOWN repeatedly until ‘LOC.KEY’ is displayed (Option #08).
3. Press MENU to enter the selected option and UP/DOWN to adjust the settings.
a. MANU: lock the keypad manually.