01865 767676
www.unicol.com
3
Revised 15/12/20
STEP 1
Check the jaws of the column grip, if you can push
them together to fit a column over, ignore this step.
If you can’t, you will need to loosen the screw on
the column grip to close them.
Thread cabling through bottom of base into column
grips as highlighted above.
STEP 2
Place the column support ring over the crocodile
lug with the straight edge facing the rear of the
base (as shown above).
Thread the cabling through the column and place
the column with holes, located approx 75mm from
the bottom, over the crocodile lugs on the base.
STEP 3
Once placed, tighten the grub screw to secure into
place.
STEP 4
Locate the mounting holes on the back of your
screen. Line the VESA mount up and using the
manufacturer recommended screws, attach the
mount to the back of the screen.
