01865 767676
www.unicol.com
5
Revised 08/12/23
GENERAL ASSEMBLY INSTRUCTIONS
Connect your device to mount plate
3
. Each mount
is dedicated to your devices so may vary from the
image above.
Connect rails
2
to mount unit
1
. To adjust sound/VC bar
height, simply fix in the slots that best suit.
Connect the mount plate
3
to the bottom of the rails
2
.
Finally, follow one of the next two steps depending
on which part code you are installing.
VCSS1 / VCSS9 / VCTS1 / VCTS9
Each style can be mounted with the devices above
or below the screen. Hook the assembled bracket
over the rail of the PZX screen mount back plate.
1
Adjust the horizontal positioning to suit, then tighten
the screws underneath to secure into position.
2
1
2
VCTST
The VCTST fixes to the 4x 150x150mm centre holes
on the mast of some stands/trolleys. In some cases,
this may include a span bar unit. In this instance,
screens will need removing as well as the bottom
two fixings.
Loosen the top two fixings and slot the VCTST
tear-drop holes over the bolts
1
. Line up the bottom
two holes, and secure fixings into place
2
. Tighten all
fixings.
1
2
1
1
1
2
2
2
3
3
3
VCSS
VCTS
VCTST
