4
01865 767676
www.unicol.com
Revised 22/01/21
STEP 7
Repeat Steps 6 & 7 for the second screen.
Adjust the level of the screen with the two top
screws on the mount arms. Once levelled secure
the screen by tightening the bottom two screws.
STEP 8
Feed cables for screen through hole in backplate
and front of mast and down through the mast and
out through the bottom of the mast/base.
Refit rear top panel using x4 M6 screws. Refit rear
door and lock.
STEP 5
Locate the mounting holes on the back of your
screen. Line the two mounting arms up and using
the taglocks/two part spacers provided and the
manufacturer recommended screws, attach the
arms to the back of the screen.
STEP 6
Line the screen and arms up with the secured
heavy duty arms and offer it up at a slight angle -
allowing the top of the mount arms to hook over
the lip of the heavy duty arms.
