![background image](http://html1.mh-extra.com/html/unicol/plx1/plx1_quick-start-manual_3731430004.webp)
4
01865 767676
www.unicol.com
Revised 15/12/20
STEP 1
Line the back plate up with the mount adapter,
as shown above. Fix 4 screws from behind the
mount adapter and into the 4 rivet nuts located on
the back plate. Ensure back plate is secure and
screws are tightened.
STEP 2
Utilising the fixing pack provided with your mount,
attach the arms to the back of your screen.
Ensure the arms are the correct way up before
tightening.
STEP 3
Using another team member, lift the screen up and
gradually offer it up to the back plate. Gently tilt the
screen forward and hook the arms over the screws
that are protruding out from the sides of the back
plate. Lower the screen until it is securely in place.
STEP 4
Once securely positioned, tighten the side screws
to secure to the mount.
ALT: If using tilting arms, this is when you can
adjust them to suit.
STAND / TROLLEY