3
Revised 26/04/24
01865 767676
www.unicol.com
STEP 1
Laying the mast on a flat surface, offer the base
up and attach as shown above. All castors should
already be pre-fixed to the base.
STEP 3
(a) Locate the mount adapter and fix it to the rear of
PZX screen back plate using the 4 x M10 x 25 Hex
Head Screws.
(b) Fit the mount adapter and fitted screen backplate
to the mast by placing fixing screws from the rear
of the mast through the fixing holes into the adapter
plate and tighten.
STEP 2
In preparation for cabling up later remove the mast
top rear cover by removing the 10 x M6 x 16 Button
Head Allen screws.
If there is an external signal or network cable to
connect, remove the bottom cover. (10 screws).
Put aside and retain.
STEP 4
Using the griplock (top) and taglock (bottom)
spacers fix the mount arms to the screen
fixing holes. Choose the correct manufacture
recommended fixing screws for your screen from
the universal fixing pack supplied.
If you are fitting the VCSS / VSTS / SBM accessory,
do it now.