4
01865 767676
www.unicol.com
Revised 15/12/20
STEP 5
Feed cables for screen through hole in backplate
and front of mast and down through cable access.
Refit rear top panel using x4 M6 screws. Refit rear
top panel door and lock.
STEP 6
Locate the mounting holes on the back of your
screen. Line the two mounting arms up and using
the taglocks/two part spacers provided and the
manufacturer recommended screws (not included),
attach the arms to the back of the screen.
STEP 7
Line the screen and arms up with the secured back
plate and offer it up at a slight angle - allowing the
top of the arms to hook over the lip of the back
plate.
STEP 8
Gently lower the screen until the arms are securely
hanging on top of the back plate. Once centered,
adjust the level of the screen with the two top
screws on the mount arms. Once levelled secure
the screen by tightening the bottom two screws.
