4
01865 767676
www.unicol.com
Revised 15/09/22
STEP 1
Loosen the truss clamp to open it up. Place around
the truss, close the clamp and tighten until secure.
Please consider cabling and fixings prior to
installation. Please check surface can support 5x
the combined solutions weight.
Please carry on with Step 2 on page 3.
STEP 1
Using the 4 ceiling mounting slots, as shown
above, determine where you want to install your
mount, mark it and fix into position.
Please consider cabling and ceiling fixings prior to
installation. Please check surface is capable of
supporting 5x the combined solutions weight.
STEP 2
Slide all cabling through the column and through
the gap in the ceiling plate socket. Being mindful
of the cables, slide the column into the socket,
ensuring that the two holes either side align with
those on the mount. Using the through bolt, secure
the column into place and tighten the two grub
screws at the rear. Follow Step 2 on page 3.
STEP 3
Slide the mount adapter into the bottom of the
column and secure on either side of the column
using the dome headed screws provided.
Carry on with Step 4 on page 3.
TRUSS MOUNTED
COLUMN MOUNTED
