6
Revised 05/01/24
01865 767676
www.unicol.com
1
2
3
SBT GENERAL ASSEMBLY INSTRUCTIONS
Connect your device to mount plate
3
. Each mount
is dedicated to your device so may vary from the
image above.
Connect rails
2
to mount unit
1
. To adjust sound bar
height, simply fix in the slots that best suit.
Connect the mount plate
3
to the bottom of the rails
2
.
VCTST GENERAL ASSEMBLY INSTRUCTIONS
Connect your device to mount plate
3
. Each mount
is dedicated to your device so may vary from the
image above.
Connect rails
2
to mount unit
1
. To adjust sound bar
height, simply fix in the slots that best suit.
Connect the mount plate
3
to the bottom of the rails
2
.
SBT
The SBT fixes to the 4x 150x150mm centre holes on
the mast of some stands/trolleys. In some cases, this
may include a span bar unit. In this instance, screens
will need removing along with the bottom two fixings.
Loosen the top two fixings and slot the SBT tear-drop
holes over the bolts
1
. Line up the bottom two holes,
and secure fixings into place
2
. Tighten all fixings.
1
2
1
2
VCTST
The VCTST fixes to the 4x 150x150mm centre holes
on the mast of some stands/trolleys. In some cases,
this may include a span bar unit. In this instance,
screens will need removing as well as the bottom
two fixings.
Loosen the top two fixings and slot the VCTST
tear-drop holes over the bolts
1
. Line up the bottom
two holes, and secure fixings into place
2
. Tighten all
fixings.
1
2
3