12
HX120
Operation
To operate the HDMI AV Matrix Extender, two ways are provided.
1. Operate by adjusting the DIP manually.
2. Setup from web user interface.
Control manually
With the convenient push button and DIP Switch on the front panel, user can quickly and easily to
operate the HDMI AV Matrix Extender directly. Please follow the steps below to setup.
1. Follow the previous chapter (Connection) to connect all devices according to your desired mode.
2. Adjust the DIP switches of transmitter and receiver/Video to the same positions.
3. Power the transmitter, Extender Receiver/VideoWall Receiver and AV devices/computers to on.
Note: Press the CONNECT button on the front panel of unit once the DIP switch has been adjusted.
Setup from web user interface
IP detection
1. Adjust the DIP switch of Transmitter and
Receiver to the same position.
2. Group the Transmitter and Extender Receiver/
VideoWall Receiver units to a network with a
PC. The actual connection may vary depending
on requirements. For more connection details,
refer to the Connection chapter.
3. Turn on the power of all connected devices.
4. Insert the bundled CD/DVD into CD/DVD ROM,
Find and double click the "Bonjour Browser"
from the bundled CD/DVD after completing
the steps above.
5. Click Web Server (HTTP) to detect all the
connected Transmitter and Extender Receiver/
VideoWall Receiver units.
6. Enter the IP address which detected from
Bonjour Browser into a web browser.
Alternatively, remove the Cat5 cable from the
unit you wish to know the IP, and then re-connect
to the unit. The screen will re-detect the input
source and show the IP information before the
image source appears.
