unication Messenger m90, Руководство пользователя

Страница: 61 / 70

m
90
User’s Guide
© 2007 Unication Co., Ltd. 59
14. Maintenance
14.1 General Care
Clean with a soft cloth dampened with soap and water.
Do not immerse in water. Do not use alcohol, solvents or other cleaning solutions.
Do not expose to excessive heat, moisture or extreme shock.
14.2 Battery Care
The Battery Life Status Indicator will flash on the M90 LCD display screen when the battery needs
recharging. Charge the battery per the instructions in Section 2.3
Charging the Battery on page 7.
Removing and Replacing the Battery
Under normal circumstances your Unication lithium ion polymer battery should not need replacing
for many years. If you do need to replace it, follow these instructions. To prevent possible data loss
or corruption, you should power off the M90 prior to removing the battery.
•
Replace battery with Unication Part No. 6653-00001 only. Use of another battery may
present a risk of fire or explosion. Refer to Section 1 for safety information. For locations
where Unication batteries may be obtained, email sales@uniamericas.com.
•
Power off the M90 (see Turning Your M90 Off and On on page 19).
•
Remove the old battery from the rear of the M90 as shown in the illustrations below. First
slide the battery lock outwards to the unlocked position, then slide the battery in the
direction shown in step 2 until it stops (approximate position as shown in step 2). Finally, lift
the end of the battery up and pull the battery out of the housing as shown in steps 3a and
3b. The battery should slide and lift out of the housing easily. Do not force.
•
Now, install the new battery per instructions in Section 2.2 Installing the Battery on page 7.
•
Dispose of used battery promptly. Keep away from Children.