UniCarriers FD20 Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 131 / 161

ANNUAL (2400 OPERATING HOURS) CHECKS
Perform the following checks in addition to daily checks, one month (200 operating hours) checks, and 3
months (600 operating hours) checks, and 6 months (1200 operating hours) checks.
Items to be checked
Engine cylinder head bolts – Retighten (C240 •
engine).
Engine cylinder – Measure compression •
pressure.
Governor – Check proper operation (maximum •
rpm under unloaded condition).
Fuel filter – Change (gas-powered trucks). •
Injection timing – Check (diesel-powered trucks). •
Steering wheel – Apply rubber grease to horn
•
contact ring.
Master cylinder and wheel cylinder – Change •
piston cup and check valve.
Wheel brake – Disassemble, check, adjust and
•
change brake drum and brake shoe.
Wheel brake – Check back plate for deformation, •
cracks or loose installation.
Mast support – Check bushings for wear or •
damage.
Hydraulic pump drive – Check for wear. •
Load handling system – Change hoses (every 1 - •
2 years).
Ignition plug – Check for burns (gas-powered
•
trucks).
Distributor cap – Check the insertion of high- •
voltage cable (gas-powered trucks).
Distributor segment – Check for burns (gas-
•
powered trucks).
Distributor center-piece – Check for wear or •
damage (gas-powered trucks).
High-voltage cable – Check for breakage (gas- •
powered trucks).
Main frame and cross members – Check for •
damage, cracks, loose rivets or bolts.
4-4 0
PERIODIC INSPECTION