26
T
08 9351 7500
E
W
www.unicarehealth.com.au
Maintenance:
Check lap belt and securing components at regular intervals for any sign of fraying or damage. Replace
if necessary. Clean the lap belt with warm soapy water and allow it to dry.
DANGER!
The lap belt should be adjusted to suit the end user as detailed above Unicare Health also recommend
that the length and fi t of the belt is checked on a regular basis to reduce the risk of the end user
inadvertently re-adjusting the belt to an excessive length. If in doubt about the use and operation of the
seat belt then ask your healthcare professional, wheelchair dealer, carer or attendant for assistance.
Options - Seat Depth
By removing the clips (1), the cross-brace unit (2) can be pushed along the frame, which then alters the
seat depth (depending on the position of the back tubes).
Make sure that the clips (1) snap into the frame holes provided.
To keep the frame as compact as possible, the seat depth can also be adjusted by using the back
tubes (41 – 46 cm in steps of 2.5 cm). To do this remove the screws (1 and 2) on the back tube bracket.
Remove the wheels and the armrests and check that the crossbrace is in the desired position (push the
cross-brace as described above). Move the back tubes to the desired position and re-tighten all screws.
Move the receiver tube for the armrests to the desired position (Fig. 36).
