Unical TOUCH SCREEN N, Руководство пользователя и инсталлятора

Страница: 13 / 44

Touch Screen
13
3.4.2 FANCOIL PAGE
From the main page, by touching the fancoil symbol (sensitive area number (3), Figure 5), you can access at the fancoils screen page
in the network.
From this page of fancoils, you can display all information refeering to the operation of the individual fan coils, identified by the
belonging’s area and the identification number of each fancoil.
Figure 12. Information and fancoil page sensitive area
The sensitive area (indicated in the figure by red squares) in this screen are given below:
1.
Active alarms of the displayed unit
2. Name of fancoil unit (the name, belonging zone and identification number of the fancoil will be displayed in this page, every
time you press on the name area, you switch to the next fancoil unit on the network.
3.
the name of the zone to which the fancoil belongs and the fancoil identification number are reported; every time you press
the name area, you switch to the next fancoil unit on the network
4. 4. e 5. Navigation bar
The informations on fancoil page are given below:
6. Detected temperature in the fancoil zones (the average value of the fancoil temperatures in the area)
a. Air temperature (°C)
b. Inlet water temperature (°C)
7.
Status and operating mode related to a specific fancoil (with fan speed)
8. Active and/or activable functions (in the bar of left scrolling)
By pressing on the configuration button (Sensitive area 4 ), you can get access to the fan setting. The fan setting can be changed for
each zone, however if you change the fan setting of the fancoil number 1 of a certain zone, so this implies that the new setting will
concer the entire zone. The fan setting page looks like this:
6
8
7
1
2
3
4
5