2
Read the precautions carefully and carry out the procedures correctly.
ATTENTION!
Do not try to install the stove on your own.
Always rely on authorised and trained personnel.
-
In case of failures or malfunctions, always contact an Authorised Service Centre;
any attempt to remove parts or to perform maintenance on the appliance can expose the
user to the risk of electric shocks. The stove contains parts which must be serviced by the
Authorised Service Centre.
-
The stove is a heating appliance;
its parts reach high temperatures and therefore touching
them without suitable precautions can cause severe scalds and burns. Pay special attention to
children.
-
When moving the appliance, contact the Authorised Service Centre for removal and new
installation.
-
Do not place your fingers or objects in the air vents.
There is a high speed fan inside the appliance which could cause severe personal injuries. Pay
special attention to children.
-
Do not remain exposed directly to the hot air flow for too long.
Direct and prolonged exposure to hot air can be harmful to health.
Pay special attention in rooms with children, elderly or sick people.
-
Should the stove malfunction, stop the appliance immediately, switch it off and contact
the Authorised Service Centre.
Continuing to use the appliance in these conditions can cause fires or electrocutions.
- If the supplementary air vent is not used (only for ducted models), check that the fan speed is
at zero (deactivated).
WARNINGS!
-
When installing the stove, keep children away from the workplace.
Unexpected accidents could occur.
-
Do not block or cover the stove body in any way or obstruct the vents on top.
Obstructing these vents can cause fires.
-
Do not use the stove in environments containing precision instruments or works of art.
The quality of these objects could undergo deterioration.
-
Do not expose animals or plants to the appliance's direct air flow.
Long direct exposure to the stove's air flow can have negative effects on plants and animals.
-
Aerate the room every now and then while using the appliance.
Insufficient aeration can cause a lack of oxygen in the room.
-
Do not allow the stove to come into contact with water.
The electric isolation could undergo damage with possible consequent electrocutions or
breakage due to thermal shock.
-
Check the installation conditions to identify any damage.
When the stove has operated for 900 hours (the text SErV will appear on the bottom display),
contact the Authorised Service Centre for cleaning and routine maintenance.
-
Do not use flammable gases near the stove.
-
Turn off the switch if you do not intend on using the appliance for long periods of time.
- All of our stoves have been tested with in-line ignition.
