Unical ENERPUMP DHW 72, Инструкция по установке и обслуживанию

Страница: 36 / 50

Luxury Air Source Heat Pump-Monobloc System 35
SYSTEM SET-UP
As the unit is designed to satisfy various installation environments, it is important to set up system
correctly. If not configured correctly, improper operation or degrade of performance can be expected.
DIP switch setting overview
CAUTION
TURN ‘OFF’ THE ELECTRIC POWER SUPPLY BEFORE SETTING DIP SWITCH.
WHENEVER ADJUSTING THE DIP SWITCH, TURN OFF ELECTRIC POWER SUPPLY TO AVOID AN
ELECTRIC SHOCK.
DIP switch introduction
The DIP switches are located on the indoor and outdoor switch box PCBs. They allow configuration of
model selection, system priority, fast check and power supply.
Indoor PCB DIP Switch Introductions:
SW1-2:
6kw/8kW 11kW 14kW 16kW
SW3-4:
Code
ON
OFF
（
Default
）
1 Self-check, Fast Check Normal Mode
2 Reserved Reserved
Remarks:
SW3 setting: The self-check function is special designed for on-line production fast check. Please always
put it on the default setting during normal use.
Outdoor PCB DIP Switch Introductions:
Code
ON OFF
1
Reserved Reserved
2
380-415V 3N
～
Power Supply 220-240V
～
Power Supply