background image

- 6 -

2. SAFETY PRECAUTIONS

Disposal of an old air conditioner

Before disposing an old air conditioner, please 

make sure it is inoperative and carry out the 

disposal by adopting all safety precautions. 

Unplug it from the power line in order to avoid 

risks of electric shock.
Please remember that an air conditioner 

contains refrigerant fluid, requiring specialized 

waste disposal. 
The valuable materials contained in the air 

conditioner can be recycled. Contact your local 

Waste Disposal Center for adequate disposal or 

contact your Dealer for any question.
Please make sure that piping of your air 

conditioner does not get damaged before 

being picked up by the relevant Waste Disposal 

Center. You can contribute to the protection of 

the environment by adopting an appropriate 

anti-pollution method of disposal.

Disposal of the packaging of your new air 

conditioner

All the packaging materials used in the package 

of your new air conditioner can be disposed 

without any danger for the environment.
The cardboard may be broken or cut into 

small pieces and given to a Waste Paper 

Disposal Service. The wrapping bag made of 

polyethylene and the polyethylene goam pads 

contain no fluorochloric hydrocarbon.
All these valuable materials may be taken to a 

Waste Collecting Center and used again after 

adequate recycling.
Consult your local Authorities for the name 

and address of the Waste Materials Collecting 

Centers and Waste Paper Disposal Services 

nearest to your house.

General warnings for safety

• Do not operate damaged air conditioners. In case of doubt, contact your Dealer.
• Use of air conditioner must be carried out in strict compliance with the instructions listed futher 

on.
• Do not damage any parts of the air conditioner that carry refrigerant by piercing or perforating the 

piping with sharp or pointed objects, by crushing or twisting the tubes or scraping off the surfaces' 

coatings. If the refrigerant spurts out and gets into eyes, this may result in serious injuries.
• Do not obstruct or cover the ventilation grille of the air conditioner. Do not put fingers nor insert 

objects into the inlet/outlet vent or into the motorized louver.
• Do not allow children to play with the air conditioner. Children should be never allowed to sit on 

the Oudoor Unit.
• The appliance is not intended for children and disabled people. They must not operate the air 

conditioner without supervision.
• Electrical works must be carried out according to the local laws. If the power cable is damaged, it 

must be replaced by the Manufacturer or by qualified Personnel. Size of power cables and connecting 

wires must be adequate to the characteristics of the air conditioner (current values and power input 

values).
• If fuses on the PCB are blown, they must be replaced with new fuses of the same type and size.
• After installation, power plug should be properly disposed.
• Exhausted batteries (infrared remote controller) should be properly disposed.
• Always remember to unplug the air conditioner before opening the inlet grille. Never try to unplug 

the air conditioner by pulling off the power cable. Always grip the power plug firmly and pull it straight 

out of the power socket.

Before starting the air conditioner, please read carefully the information in this "USER MANUAL". 

The User's Manual contains very important suggestions relatied to installation, operation and 

maintenance of the air conditioner and concerning your personal safety.

The Manufacturer accept no responsibility for the damages that may arise due to non-

observance of the instructions listed in this "USER MANUAL".

Содержание CMCS 12HI





























Отзывы: