UNIA KOS Premium Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 34

UNIA KOS Premium Скачать руководство пользователя страница 30

OPERATING AND MAINTENANCE MANUAL KOS PREMIUM

- 28 -

5.7

Storage of the Cultivator

Clean the machine from soil each time after finishing work and then inspect all parts and
assemblies. Replace any worn or damaged parts with new ones. Tighten any loosen screw
connections. Store the machine on hardened surfaces.

After the season:

•

clean the cultivator thoroughly

•

lubricate the machine at the specified lubrication points

•

wash faces of the coulter discs, rollers and hitch axle pivots with kerosene and protect them

against corrosion applying grease with brush

•

repair spot defects of the paintwork by repainting

•

when the machine is to be stored outdoors in winter – disassembly the hydraulic cylinder

together with the hoses and keep them in a dry, well ventilated and possibly darkened room

5.8

Disassembly and Disposal

After its working life, the cultivator is to be scrapped. Disassembly should be performed by a
specialized company.

5.9

Warranty Conditions and Warranty Services

Agricultural machinery is warranted to the provisions specified in the Instruction
Manual for proper operation and maintenance. Under the warranty period, only

the genuine parts made by ‘UNIA’ Grudziądz may be used.

Any modifications or repairs made by the user are not allowed in the warranty period. This may lead
to loss of warranty. For more detailed information on how to file a complaint, see the Warranty Card
attached to each machine together with its Operating Manual.

The warranty services are performed by: the supplier (dealer) entered to the Warranty Card when
buying the machine.

«
...
28
29
30
31
32
...
»

Содержание KOS Premium



































Отзывы:

Нет отзывов