UNIA CROSS S, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 34

OPERATING AND MAINTENANCE MANUAL CROSS S
- 19 -
3.5.4. Heavy-Duty Tine, Type CX
Fig. 14: Heavy-Duty Tine
•
Tines of CROSS HP feature automatic protection against overload in the form of a
compression spring.
• Overload protection is preset to 5500N of the trigger force on the coulter share point.
THIS SETTING MUST NOT BE CHANGED!
•
Only trained personnel may disassembly the protection device.
• Any intervention in the mechanism may result in serious personal injury or even death.
•
Check all screw connections around the tine and tighten any loose connections before each
use.
• Measure the spring tension (compression) on a regular basis..
• A sheared bolt [A], which breaks after exceeding a limit value is an additional safety measure.
USE ONLY GENUINE PROTECTION DEVICES!
• Replace any working components as soon as the effects of the machine operation
deteriorate.
• Remove the screws [D] to replace the undercutters.
• remove the screws [A] to replace the coulter.
•
Remove the screws [B] to replace the mouldboard.
• Remove the screws [D] to replace the narrow coulter.
• You may need to use a drift in order to remove the screws from the slots after removing the
nuts.
• Remove the undercutters before replacing the coulter.
USE ONLY GENUINE SPARE PARTS!